Kubota WSM L3540-II, Workshop Manual

Page: 88 / 672

GENERAL L3540-II, L4240-II, L5040-II, L5240-II, L5740-II , WSM
G-66
Stopper Bolt (for A/C Compressor)
Application
• Use with the stopper magnet clutch.
NOTE
• This special tool is not provided, so make it referring to the
figure.
9Y1211167GEG0097US0
Remover Magnet Clutch (for A/C Compressor)
Application
• Use to remove the hub plate or center piece.
NOTE
• This special tool is not provided, so make it referring to the
figure.
9Y1211167GEG0098US0
Valve Adaptor
Application
• Use for measuring the system pressure of shuttle valve.
9Y1211167GEG0099US0
A 12 mm (0.47 in.)
B 35 mm (1.38 in.)
C 7 mm (0.28 in.)
D 0.4 mm (0.016 in.)
E 5.5 mm dia. (0.22 in. dia.)
F 6.5 mm dia. (0.26 in. dia.)
G 0.52 rad (30 °)
H M8 × P1.25
A 12 mm (0.47 in.)
B 55 mm (2.16 in.)
C 20 mm (0.79 in.)
D 5 mm dia. (0.20 in. dia.)
E M8 × P1.25
A 24 mm (0.94 in.)
B 27.7 mm (1.09 in.)
C PS1/4
D 11 mm (0.43 in.)
E 15 mm (0.59 in.)
F 40 mm (1.57 in.)
G 60 mm (2.36 in.)
H 15 mm (0.59 in.)
I PT1/8
J 4 mm dia. (0.15 in. dia.)
C1 Chamfer 1 mm (0.039 in.)
C2 Chamfer 2 mm (0.079 in.)
KiSC issued 02, 2015 A