Kubota WSM L3540-II, Workshop Manual

Page: 72 / 672

GENERAL L3540-II, L4240-II, L5040-II, L5240-II, L5740-II , WSM
G-50
Engine Hook 2
Application
• Use to fix the engine when hooking, instead of the original hook with hook 1 as a set.
9Y1211167GEG0078US0
Plastigauge
Code No.
• 07909-30241
Application
• Use to check the oil clearance between crankshaft and bearing,
etc..
Measuring range
• Green: 0.03 to 0.07 mm (0.001 to 0.003 in.)
• Red: 0.05 to 0.1 mm (0.002 to 0.006 in.)
• Blue: 0.1 to 0.2 mm (0.004 to 0.009 in.)
WSM000001GEG0022US0
Red Check
Code No.
• 07909-31371
Application
• Use to check cracks on cylinder head, cylinder block, etc..
WSM000001GEG0023US0
A 217 mm (8.54 in.)
B 140 mm (5.51 in.)
C 49 mm (1.9 in.)
D 44 mm (1.7 in.)
E 20 mm Hole (0.79 in. Hole)
F 30 mm (1.2 in.)
G 71 mm (2.8 in.)
H 10 mm (0.39 in.)
I 85 mm (3.3 in.)
J 0.52 rad (30 °)
K 9.0 mm (0.35 in.)
L 120 mm (4.72 in.)
M 10 mm (0.39 in.)
N 139 mm (5.12 in.)
O 10 mm (0.39 in.)
P 44.7 to 45.3 mm (1.76 to 1.78 in.)
Q 10 mm (0.39 in.)
R 65 mm (2.6 in.)
S
2 × 8.50 to 8.80 mm Drilled hole
(2 × 0.335 to 0.346 in. Drilled hole)
T
20 mm Spot-faced hole 1 mm deep
(0.79 in. Spot-faced hole 0.04 in.
deep)
C10 Chamfer 10 mm (0.39 in.)
R9 Radius 9.0 mm (0.35 in.)
R10 Radius 10 mm (0.39 in.)
R20 Radius 20 mm (0.79 in.)
KiSC issued 02, 2015 A