Kubota WSM L3540-II, Workshop Manual

Page: 624 / 672

CABIN L3540-II, L4240-II, L5040-II, L5240-II, L5740-II , WSM
10-S6
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts: Refer to "5. TIGHTENING TORQUES" on page G-13.)
9Y1211167CAS0003US0
Item N·m kgf·m lbf·ft
Alternator B terminal 5.9 to 9.8 0.6 to 1.0 4.4 to 7.2
Starter B terminal 7.4 to 9.8 0.75 to 1.0 5.5 to 7.2
Seat bracket mounting bolts and nuts 23.5 to 27.5 2.4 to 2.8 18 to 20
Step mounting bolts 23.5 to 27.5 2.4 to 2.8 18 to 20
Outer roof mounting screw 3.5 to 4.0 0.36 to 0.46 2.6 to 2.9
Cabin mounting bolt and nut 124 to 147 12.6 to 15.0 91.2 to 108
High pressure pipe and low pressure pipe mounting
screw
7.9 to 11 0.80 to 1.2 5.8 to 8.6
Compressor mounting screws 25 to 29 2.5 to 3.0 18 to 21
Clutch mounting screw 12.3 to 14.1 1.25 to 1.44 9.05 to 10.4
A/C unit mounting screw (M6) 4.0 to 6.8 0.40 to 0.70 2.9 to 5.0
A/C unit mounting screw (M8) 9.81 to 11.6 1.00 to 1.19 7.24 to 8.60
Low pressure pipe (Cooler pipe (suction)) retaining nut 7.90 to 11.8 0.806 to 1.20 5.83 to 8.70
High pressure pipe (Cooler pipe (liquid)) retaining nut 11.8 to 14.7 1.21 to 1.49 8.71 to 10.8
High pressure pipe 1 mounting screw
(Compressor side)
7.90 to 11.8 0.806 to 1.20 5.83 to 8.70
High pressure side 1 retaining nut (Condenser side) 4.0 to 6.8 0.41 to 0.69 3.0 to 5.0
High pressure pipe 2 retaining nut (Receiver side) 11.8 to 14.7 1.21 to 1.49 8.71 to 10.8
Low pressure pipe mounting screw (Compressor side) 7.90 to 11.8 0.806 to 1.20 5.83 to 8.70
High pressure pipe 2 retaining nut 11.8 to 14.7 1.21 to 1.49 8.71 to 10.8
Low pressure pipe retaining nut 7.90 to 11.8 0.806 to 1.20 5.83 to 8.70
Wiper motor mounting nut (4) 6.4 to 9.3 0.65 to 0.95 4.7 to 6.8
KiSC issued 02, 2015 A