19
CHECKS BEFORE START
B
Diesel Particulate Filter (DPF)
regeneration indicator
As PM (Particulate Matter) builds up inside the DPF, the
DPF regeneration cycle starts automatically to burn away
PM. During DPF regeneration, this lamp lights up and
stays on and the beep tone keeps sounding to warn the
operator.
B
Engine rev up warning lamp
If the engine rpm is too low to start regeneration, the DPF
regeneration indicator lights up and starts blinking. In
such case, rev up the engine until this lamp goes out, the
regeneration will automatically start.
B
Air Cleaning Warning Indicator
If the air cleaner is clogged, the air cleaner warning
indicator on the instrument panel will light up.
If this should happen at high engine rpm, stop the engine
and clean the air cleaner element.
(See "Inspection and Cleaning Air Cleaner Element", "Air
Cleaner Element" and "Cleaning Evacuator Valve" in
"EVERY 50 SERVICE HOURS" in "REGULAR CHECKS
AND MAINTENANCE WORK" section.)
(1) DPF regeneration indicator
(1) Engine rev up warning lamp
(1) Air cleaner warning indicator
Summary of Contents for SSV65
