Kubota SSV65, Operator'S Manual

Page: 97 / 125

71 REGULAR CHECKS AND MAINTENANCE WORK
B
Replacing Air Cleaner Element
Open the rear door. Remove the dust-cover. Remove and
replace both the outer element and inner element with
new elements.
When reassembling, install the dust-cover so that its TOP
mark (arrow) faces up-wards.
A
Shorten the replacement period if the machine is used
in dusty or sandy areas.
A
Replace the air cleaner element regularly or foreign
particles will accumulate, which will cause the DPF to
become clogged in a shorter amount of time than
expected. If this happens, the normal cleaning interval
for the DPF (3000 hours) can’t be followed.
A
Use KUBOTA genuine inner and outer element.
A
Do not blow air to clean the case inside. It allows dust
come into the inner element.
A
Clean up the case inside with clean wet cloth. After
cleaning, wipe it dry with clean dry cloth.
B
Changing Engine Oil
To avoid personal injury or death:
A
First stop the engine then remove the key and
wait long enough for the oil to cool down.
A
Before filling oil, wipe away all sand and dust from
around the oil port. Make sure to use an identical type
of engine oil.
A
The machine has been filled with engine oil before
delivery. See
"RECOMMENDED OILS" section.
(Do not mix different oils.)
1. Loosen the bolts and slide the under cover on the
bottom of the frame.
(1) Inner element
(2) Outer element
(3) Dust-cover
(4) Clamps
(5) "TOP" mark
(1) Under cover
(2) Bolts (A) Slide