Kubota SSV65, Operator'S Manual

Page: 114 / 125

88 TROUBLESHOOTING
E: 032
Float mode selector
solenoid cable broken or
short-circuited
- - -
The float solenoid fails to
function and the float mode
is not turned on.
Immediately contact your local
dealer.
E: 036
Forward detection pressure
sensor (right) cable broken
- - -
The back buzzer
malfunctions when the right
wheels move forward.
Immediately contact your local
dealer.
E: 037
Forward detection pressure
sensor (left) cable broken
- - -
The back buzzer
malfunctions when the left
wheels move forward.
Immediately contact your local
dealer.
E: 9000
Requirement for DPF
regeneration.
- - -
DPF must be regenerated,
but low engine rpm is
unable to start DPF
regeneration.
Rev up the engine rpm and start
DPF regeneration.
If this error code number still
appears, immediately contact
your local dealer.
E: 9001
Requirement for DPF
regeneration.
-
DPF must be regenerated,
but low engine rpm is
unable to start DPF
regeneration.
If you leave the machine
with the hydraulic locked,
the engine can stop
automatically.
Rev up the engine rpm and start
DPF regeneration.
If this error code number still
appears, immediately contact
your local dealer.
E: 9002 DPF is regenerated. - - --- ---
E: 9003
Requirement for DPF
regeneration.
- -
DPF must be regenerated,
but unable to start
regeneration.
Immediately contact your local
dealer.
E: 9004
Requirement for DPF
replacement.
- - DPF must be replaced.
Immediately contact your local
dealer.
E: 9006
Requirement for DPF
regeneration.
- - -
DPF must be regenerated,
but unable to start
regeneration because the
inhibit switch is activated.
Move the machine to a safe
place and release the inhibit
switch to start DPF regeneration.
If this error code number still
appears, immediately contact
your local dealer.
E: 9007
Requirement for DPF
regeneration.
-
DPF must be regenerated,
but unable to start
regeneration because the
inhibited switch is
activated.
If you leave the machine
with the hydraulic locked,
the engine can stop
automatically.
Restart the engine, move the
machine to a safe place and
release the inhibit switch to start
DPF regeneration.
If this error code number still
appears, immediately contact
your local dealer.
E: 9010 Engine stop for DPF - -
The DPF regeneration fails
to function. The machine is
left with the hydraulic
system locked, by which
the engine stops itself.
Restart the engine, move the
machine to a safe place and
release the inhibit switch to start
DPF regeneration.
If this error code number still
appears, immediately contact
your local dealer.
E: 9100 Rpm sensor system - ---
Immediately contact your local
dealer.
Error Code
Number
Problem or Failure
Machine condition
Provisional measure
and
Correction
Engine performance
Machine performance
Accele-
ration
limited
Engine
output
limited
Engine
stopped