CHECKS BEFORE START
18
B
Battery Charge Lamp
This battery charge lamp lights up if the charging system
fails with the engine running.
When the starter key is turned in "RUN" position with the
engine off, the lamp lights up and when the engine starts,
the lamp goes out.
If the lamp stays on with the engine running, stop the
engine and check the V-belt.
B
Hydraulic Oil Temperature Warning Lamp
If the hydraulic oil temperature rises above a specified
temperature level, the indicator starts blinking and the
buzzer beeps once for advance warning.
If the hydraulic oil temperature further rises to critical level,
the blinking intervals becomes shorter and the buzzer
keeps on beeping and the engine rpm is limited.
When the oil temperature has dropped below the
specified level or the starter key is turned off, the warning
will cease.
Stop the engine and check for an unspecified level in the
hydraulic oil tank and for a hydraulic oil leak.
B
Hour-Meter
Indicates the total operating hours of the machine.
How the indicator works
A
The meter advances one hour after an hour of
operation regardless of the engine rpm.
(1) Battery charge lamp
(1) Hydraulic oil temperature warning lamp
(1) Hour-meter
Summary of Contents for SSV65
