Kubota SSV65, Operator'S Manual

Page: 63 / 125

37 OPERATION OF THE MACHINE
ATTACHMENT CONTROL DEVICE
(OPTION)
This option is used to feed electrical power for an
attachment (to drive a valve, for instance).
With the AUX port ready for use, power can be supplied.
K: +12V and B: GND of the 14-pin coupler attached on the
arm (see below)
A
The K (+12V) of the 14-pin coupler turns on when the
starter switch is in "RUN" position.
C Operation
Press the numbered electrical control switch on the left or
right lever that corresponds with the desired valve
function, to be powered at +12V
C 14-pin coupler harness connection chart
REF. No. means the same number of switches of next
figure.
A AUX 3rd func. is momentaly action.
A
AUX electrical mode change is alternate action.
(1) 14-pin coupler
REF.
No.
Pin
Port
REMARKS
- B GND
1 C AUX 1st func.
2 D AUX 1st func.
3 E AUX 2nd func.
4 F AUX 2nd func.
5 G AUX 3rd func.
6 H AUX 3rd func.
7 J AUX electrical mode change
- K +12 V