Kubota SSV65, Operator'S Manual

Page: 105 / 125

79 REGULAR CHECKS AND MAINTENANCE WORK
4. Close the drain plug and fill the radiator and the
recovery tank with coolant fluid. Let the engine idle for
about 5 min., stop the engine and remove the key.
5. Check the coolant level of recovery tank and add the
coolant if necessary.
6. The machine has been shipped filled with 50% anti-
freeze solution.
A Do not operate the engine without coolant.
A To fill the radiator system and the recovery tank, use
fresh water and anti-freeze fluid.
A
When the anti-freeze is mixed with water, the anti-
freeze mixing ratio must be less than 50%.
A Tighten the radiator cap properly. If the cap is loose or
not properly fitted, overheating of the engine can result
due to coolant fluid loss.
B
Replacing Fuel Hose
Replace the hoses and clamps.
(See "Checking Fuel and Intake Air Line" in EVERY 250
SERVICE HOURS" section.)
B
Replacing Intake Air Line
Replace the hose and clamps.
(See "Checking Fuel and Intake Air Line" in EVERY 250
SERVICE HOURS section.)
(1) Radiator cap
(2) Shutoff-valve
(1) Drain plug
(2) Coolant drain hose
(1) Coolant recovery tank (A) "FULL"
(B) "LOW"
Radiator
SSV65 6.8 L
SSV75 7.6 L
Recovery tank each model 2.0 L
(1) Fuel lines
(2) Fuel drain line