Kubota SSV65, Operator'S Manual

Page: 103 / 125

77 REGULAR CHECKS AND MAINTENANCE WORK
B
Adjusting Engine Valve Clearance
Consult your local KUBOTA Dealer for this service.
EVERY 1500 SERVICE HOURS
Do all 50, 250 and 500 hour servicing at the same time.
B
Checking Injector Tip
Consult your local KUBOTA dealer for this service.
B
Replacing Oil Separator Element
To avoid personal injury or death:
A
Be sure to stop the engine before replacing the
oil separator element.
1. Remove the cover and take out the element. Wipe off
oil and the carbon in the case with a clean rag.
2. Fit a new oil separator element and O ring.
3. Tighten the cover until it comes into contact with the
body.
B Checking PCV (Positive Crankcase
Ventilation) Valve
Consult your local KUBOTA Dealer for this service.
B Checking EGR Cooler
Consult your local KUBOTA Dealer for this service.
EVERY 2000 SERVICE HOURS
Do all 50, 250, 500 and 1000 hour servicing at the same
time.
B
Checking the Alternator and Starter Motor
A Contact your KUBOTA dealer for details.
EVERY 3000 SERVICE HOURS
Do all 50, 250, 500, 1000 and 1500 hour servicing at the
same time.
B
Checking EGR System
Consult your local KUBOTA dealer for this service.
B
Checking Turbocharger
Consult your local KUBOTA dealer for this service.
B Cleaning Diesel Particulate Filter (DPF)
The longer the DPF operates, the more ash (burnt
residue) is collected in the filter. Too much ash build-up
adversely affects the DPF performance. Consult your
local KUBOTA Dealer to clean up the filter.
Hydraulic
oil
Return
filter
Suction
Filter
Normal work
every 1000
Hrs.
every 500
Hrs.
(250 Hrs.
after first
operation)
every 1000
Hrs.
Hammer
work
portion
20% every 800 Hrs.
40% every 400 Hrs.
60% every 300 Hrs.
more every 200 Hrs.
(1) Oil separator
(1) Body
(2) Oil separator element
(3) O ring
(4) Cover