Kubota SSV65, Operator'S Manual

Page: 113 / 125

87 TROUBLESHOOTING
E: 019
Auxiliary hydraulic control
system (Solenoid valve for
Leftward SW)
- - -
The auxiliary hydraulic
control system is not turned
on.
The machine's other
functions are still operative.
Immediately contact your local
dealer.
E: 020
Electronic travel torque
management system
- - -
The anti-stall solenoid fails
to function. The machine
fails to move.
Immediately contact your local
dealer.
E: 021
The sensor's 5V power
supply is short-circuited.
- - -
The majority of systems
fail.
*The engine may be started
and the machine may
move.
But do not try any jobs.
(Just move the machine to
a safe place.)
Immediately contact your local
dealer.
E: 022
Fan rpm control solenoid
valve cable broken.
- - -
The fan speed is kept its
highest level. Immediately contact your local
dealer.
E: 023
This error code number
appears if a jumper cable is
connected to a 24V battery
or improper device to jump
start the engine.
- - -
Immediately stop using
connected device and
disconnect the 24V battery.
When the engine gets
restarted and is running
with no error code number
appearing, it means there is
no problem.
If this error code number still
appears, immediately contact
your local dealer.
E: 024
Hydraulic oil temperature
sensor error
- - -
The traveling speed is kept
low speed. Immediately contact your local
dealer.
E: 026 CRS CAN communication - ---
Immediately contact your local
dealer.
E: 027
Solenoid for the ride control
is broken or short-circuited.
- - - The ride control stops.
Immediately contact your local
dealer.
E: 028
Solenoid for the fan is
broken or short-circuited.
- - -
The fan speed is kept its
highest level. Immediately contact your local
dealer.
E: 029
Solenoid for the hydraulic
lock system (arm) is broken
or short-circuited.
- - -
The solenoid for the
hydraulic lock system
stops.
Immediately contact your local
dealer.
E: 029 Acceleration system - -
The machine is operative at
the idling rpm.
Move the machine to a place
suited for repair. Immediately
contact your local dealer.
E: 030
Solenoid for the hydraulic
lock system (bucket) is
broken or short-circuited.
- - -
The solenoid for the
hydraulic lock system
stops.
Immediately contact your local
dealer.
E: 030
ECU CAN communication
cable broken
- - -
The traveling speed is kept
low speed and the fan
speed is kept its highest
level.
Immediately contact your local
dealer.
E: 031
The pressure sensor of the
high speed mode is broken
or short-circuited.
- - -
The traveling speed is kept
low speed. Immediately contact your local
dealer.
Error Code
Number
Problem or Failure
Machine condition
Provisional measure
and
Correction
Engine performance
Machine performance
Accele-
ration
limited
Engine
output
limited
Engine
stopped