Kubota SSV65, Operator'S Manual

Page: 40 / 125

CHECKS BEFORE START 14
B
Hydraulic Quick-Hitch Switch (Option)
The switch is used to attach and detach an attachment by
activating the hydraulic quick-hitch.
Move the switch to the " " (LOCK) mark to get the hitch
locked. Move it to the " " (UNLOCK) marked position to
unlock the hitch and detach the bucket, for example. After
cylinder is moved to locked position, always check to be
sure both pins are engaged to the attachment.
B
Hydraulic Bucket Positioning Switch
(Option)
Press the upper side of the switch to engage hydraulic
bucket positioning. Press the lower side of the switch to
disengage.
A
Self leveling is only operational during the lift arms
raise function.
B
Wiper/Washer Switch (Closed cab model)
To start the wiper, press the upper side of the switch when
the starter key is in "RUN" position. (Press further and
hold for washer fluid.)
To stop the wiper, press the lower side of the switch.
A
Do not activate the washer switch (B) if the tank for the
cleaning fluid is empty; the pump can be damaged.
A Do not activate the wiper switch (A) if the window is
dry. In this case, make sure that cleaning fluid is
applied to the pane before activating the wiper.
A
In freezing conditions, make sure that the wiper blade
is not frozen to the glass before switching-on. The
motor can be damaged if the wiper system is used
under such conditions.
A
Wiper and washer are operable only during engine
operation.
(1) Hydraulic quick-hitch switch (A) "UNLOCK" position
(B) "LOCK" position
(1) Hydraulic bucket positioning switch
(Hydraulic bucket positioning model only)
(1) Wiper / washer switch (A) Wiper
(B) Washer