Kubota M100GX, Operator'S Manual

Page: 165 / 178

143 TROUBLESHOOTING
POWER SHIFT/RANGE SHIFT TROUBLE
SHOOTING
If something is wrong with the power shift / range shift, an
alarm sounds or the error code shown below is displayed
on the liquid crystal display, indicating the location of the
trouble. If an error code appears, immediately contact
your local KUBOTA Dealer for repairs. Depending on the
parts of the trouble, tractor can be used with some
restriction as emergency measure. For details, check the
error code and operator's action columns.
(1) Power shift number display area
(2) Range shift position display area
(3) Engine speed display area
Displayed error code
Alarm buzzer Condition Operator's action
Power shift
number
display area
Engine
speed
display
area
and
to
flashing
alternately
E-R51
3 consecutive
tones
A Clutch is operated.
A Hydraulic switch (master)
trouble.
A
Proportional solenoid valve
(master) trouble.
Contact your local KUBOTA Dealer.
(If necessary, move the range shift
lever to L. The machine can travel at
any of 1st to 8th gears.)
and
to
flashing
alternately
E-R20
3 consecutive
tones
A Trouble with the output voltage
of the clutch pedal sensor.
A
Clutch pedal sensor trouble.
Contact your local KUBOTA Dealer.
(If necessary, move the range shift
lever to N (in the L side) first and then
to L. The machine can travel at any
of 1st to 8th gears.)
flashing E-R37
3 consecutive
tones
A Proportional solenoid valve
(master) trouble. Contact your local KUBOTA Dealer.
(The machine cannot travel.)
--- --- ---
A
Shuttle switch (F/R) trouble.
A
Shuttle F/R is not displayed.
Contact your local KUBOTA Dealer.
(The machine cannot travel.)