ASSEMBLY INSTRUCTIONS
44
[Upper position (self-leveling is off)]
12. Attach the lever cover in place.
[M7998 (ROPS MODEL)]
[M7999 (CAB MODEL)]
C
Cable guide section [M7998 (ROPS model only)]
1. Attach the cable guide to the fender.
2. Pass the controller cable through the cable guide.
C
Control valve cover section
1. Attach the valve cover to the valve stay.
(1) Self-level on/off lever
(Lower position)
(2) Self-level on/off lever
(Upper position)
(3) Spool for self-leveling
(A) Spool length is same
(B) Spool length is shorter
than others
(1) Lever cover
(2) 2-M8 x 16 flange bolts
(1) Lever cover
(2) 2-M8 x 16 flange bolts
(1) Cable guide
(2) M8 x 16 bolt with washers
(1) Cable guide
(2) Controller cable
(1) Valve cover
(2) 3-M8 x 16 bolts with washers
