ASSEMBLY INSTRUCTIONS
8
B
Main Frame [Upper Muffler Model]
A
Before attaching the main frames, make sure that oil
or contamination (grease, grit, dust, etc.) is NOT
adhering to the joint surfaces of these and counter
parts, and to the threads of the bolts for tightening. If
oil or contamination has adhered, wash the parts and
clean them. If oil or contamination remains on the
threads, it may lead to damaged threads and the bolts
may be loosened.
1. Install the left and right main frames to the clutch
housing and the front frame as shown.
A
On installing main frame, do NOT pinch any hoses of
tractor.
A
Main frame (LH) must be hoisted vertically as shown
to avoid contact with the fuel tank.
B
Main Frame [Under Muffler Model]
A
Wait long enough for the muffler cover and the muffler
pipe to cool down.
A
Before attaching the main frames, make sure that oil
or contamination (grease, grit, dust, etc.) is NOT
adhering to the joint surfaces of these and counter
parts, and to the threads of the bolts for tightening. If
oil or contamination has adhered, wash the parts and
clean them. If oil or contamination remains on the
threads, it may lead to damaged threads and the bolts
may be loosened.
(1) Main frame
(2) 16-M20 x 60 bolts
16-M20 spring lock washers
16-3/4 hardened plain washers
Tightening torque
367.8 N-m
(37.5 kgf-m)
(271.3 ft-lbs)
(1) Main frame (LH)
(2) Fuel tank
