ASSEMBLY INSTRUCTIONS
36
10. Tighten up the lock nuts at both sides of the valve stay
to secure the cables in place.
A
With the lock nuts tight in position, move the lever to
make sure that the cables and spools behave
smoothly as specified.
11. Attach the lever cover in place.
[M7995 (ROPS MODEL)]
[M7996 (CAB MODEL)]
C
Cable guide section [M7995 (ROPS model only)]
1. Attach the cable guide to the fender.
2. Pass the controller cable through the cable guide.
(1) 4-M16 lock nuts
Tightening torque
60.0 to 80.0 N-m
(6.1 to 8.2 kgf-m)
(44.3 to 59.0 ft-lbs)
(1) Lever cover
(2) 2-M8 x 16 flange bolts
(1) Lever cover
(2) 2-M8 x 16 flange bolts
(1) Cable guide
(2) M8 x 16 bolt with washers
(1) Cable guide
(2) Controller cable
