ASSEMBLY INSTRUCTIONS
18
10. Apply the labels on the cover.
A
Wipe off the dust, oil and grease completely from label
cover surface.
A
Do not use the cotton work gloves at the time of label
attachment.
And also be careful not to touch the label adhesive
with your hand.
A
The bubble must not remain after sticking.
C
Controller cables section
1. Set the lock lever on the cable controller to the neutral
position.
A
Control lever should be neutral and be locked with lock
lever.
2. Install one lock nut to each cable end. Then route the
cable ends through the valve stay.
A
The cable with blue tape is for boom section and the
cable with red tape is for bucket section.
(1) Label of lever lock
(2) Label of danger 3
(1) Lock lever
(A)
"LOCK"
(B) "UNLOCK"
(1) Cable (Blue, Boom section)
(2) Cable (Red, Bucket section)
(3) 2-M16 lock nuts
(4) Valve stay
(5) Spool (Boom section)
(6) Spool (Bucket section)
