65
ASSEMBLY INSTRUCTIONS
A
Secure the earth harness in place. Adjust its angle
beforehand, as required, not to run over the valve bolt
as shown below.
11. Put the relays to the relay stay.
12. Using the cross-shaped clamps, secure the 3rd
function harness to the hoses, as shown below.
A
Clamp the 3rd function harness at the white-taped
point.
13. Using the cross-shaped clamp, secure the 3rd function
harness to the hoses, as shown below.
(1) Valve bolt
(A) Cable running over the
bolt (Not good)
(1) Relay stay
(2) Relay (with white connector)
(3) Relay (with black connector)
(1) 3rd function harness
(2) Loader valve tank hose
(3) 3rd function valve to loader valve pump hose
(4) 2-Clamps (72427-3133-30)
(1) 3rd function harness
(2) 3rd function PP hose
(3) Clamps (72427-3133-30)