ASSEMBLY INSTRUCTIONS
22
7. Adjust elbow adapter angle which does not twist the
hose, then tighten.
8. Connect the power beyond line hose as shown in the
figure.
9. Shift the main shift lever and the range and creep gear
shift lever to make sure the links do not contact to the
hoses. If the links contact to the hoses, revise the hose
route.
C
Connector assembly stay section
1. Fit the connector assembly stay to the left and right
main frame as shown in the figure.
A
At the time of assembly, use the holes which showing
on the picture.
(1) Elbow adapter (7/8-UNF)
(1) Power beyond line hose
(Green, 670 mm (26.4 in.), 3/4-UNF and 3/4-UNF)
(2) Valve power beyond port (Green dot)
(1) 2-M10 x 60 bolts
(2) 2-M10 nuts
(3) 2-M10 plain washers
(4) 2-M10 spring lock washers
(5) Connector assy stay
(A) Use these holes.
