KTM 390 DUKE 2017 Owner'S Manual Download Page 90

Page: 90 / 255

8 PREPARING FOR USE

8.2

Running in the engine

–

During the running-in phase, do not exceed the specified engine speed.
Guideline

Maximum engine speed

During the first: 1,000 km (620 mi)

7,500 rpm

Info

During the running-in phase, the shift warning light is set to a specified value and cannot be changed.

–

Avoid fully opening the throttle!

8.3

Loading the vehicle

Warning

Danger of accidents

Total weight and axle loads influence the handling characteristic.

The overall weight consists of: motorcycle ready for operation and with a full tank, driver and passenger
with protective clothing and helmet, and luggage.

–

Do not exceed the maximum permissible overall weight or the axle loads.

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands