KTM 390 DUKE 2017 Owner'S Manual Download Page 75

Page: 75 / 255

7 COMBINATION INSTRUMENT

Press and
hold the

SET

button for 3-5
seconds.

All entries in the

Trip 2

menu are reset.

7.17.12 Warning

F00809-01

Condition

• Message or warning is present.

–

Press the

SET

button when the menu is closed.

–

Press the

DOWN

button until

Info

is marked. Press

the

SET

button to open the menu.

–

Press the

DOWN

button until

Warning

is marked. Press

the

SET

button to open the menu.

–

Use the

DOWN

button to navigate through the warnings.

In the

Warning

menu, all warnings that have occurred are dis-

played and stored.

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands