KTM 390 DUKE 2017 Owner'S Manual Download Page 178

Page: 178 / 255

15 ELECTRICAL SYSTEM

176

F00848-10

To change the fuse of the ABS hydraulic unit:

–

Take off the protection cap and remove fuse

Info

You can recognize a faulty fuse by a burned-out
fuse wire

Warning

Fire hazard

Incorrect fuses overload the electrical

system.

–

Only use fuses with the required ampere value.

–

Do not bypass or repair fuses.

–

Use spare fuses with the correct rating only.

Fuse (75011088015) (

p. 225)

Tip

Replace spare fuse

in the fuse box so that it is

available if needed.

–

Mount the protection cap.

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands