KTM 390 DUKE 2017 Owner'S Manual Download Page 129 | Manualshive

Page: 129 / 255

background image

12 SERVICE WORK ON THE CHASSIS

127

Chain tension

5 … 7 mm (0.2 …
0.28 in)

» If the chain tension does not meet the specification:

–

Adjust the chain tension. (

–

Remove the rear of the motorcycle from the lifting gear.
(

12.13

Adjusting the chain tension

Warning

Danger of accidents

Incorrect chain tension damages components and results in accidents.

If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear
wheel bearings wear more quickly. Some components may break if overloaded.
If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. As a result, the
rear wheel locks or the engine will be damaged.

–

Check the chain tension regularly.

–

Set the chain tension in accordance with the specification.

Preparatory work

–

Raise the motorcycle with the rear lifting gear. (

–

Check the chain tension. (

«
...
127
128
129
130
131
...
»

Summary of Contents for 390 DUKE 2017
































































































































































































































































Reviews:

No comments

Related manuals for 390 DUKE 2017

Pulsar 150 DTS-i

Brand: Bajaj Pages: 33

Brand: Baja motorsports Pages: 37

Dominar 250 BS VI

Brand: Bajaj Pages: 52

Brand: Baja motorsports Pages: 4

Brand: Bajaj Auto Pages: 40

SEMIFARINGS ANARCHY

Brand: CUSTOMACCES Pages: 2

Power Commander III 718-411

Brand: Dynojet Pages: 3

Brand: KTM Pages: 13

Easyrack 6617501 01 01

Brand: hepco & becker Pages: 4

Brand: Memphis Shades Pages: 2

Brand: GAS GAS Pages: 150

Stelvio 1200 MY11 2011

Brand: MOTO GUZZI Pages: 385

Brand: X-lite Pages: 84

Brand: Big Bike Parts Pages: 3

REACTOR 40 KICKER SUZUKI ADAPTER

Brand: Garmin Pages: 40

Brand: R&G Pages: 2

Spyder ST Limited SE5

Brand: Can-Am Pages: 41

Brand: Benelli Pages: 529

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands