KTM 390 DUKE 2017 Owner'S Manual Download Page 141

Page: 141 / 255

13 BRAKE SYSTEM

139

» If the brake disc exhibits damage, cracking, or deforma-

tion:

–

Change the front brake disc.

–

Change the rear brake disc.

13.4

Checking the brake fluid level of the front brake

Warning

Danger of accidents

An insufficient brake fluid level will cause the brake system to fail.

If the brake fluid level drops below the

MIN

marking, the brake system is leaking or the brake linings are

worn down.

–

Check the brake system and do not continue riding until the problem is eliminated. (Your authorized
KTM workshop will be glad to help.)

Warning

Danger of accidents

Old brake fluid reduces the braking effect.

–

Make sure that brake fluid for the front and rear brake is changed in accordance with the service
schedule. (Your authorized KTM workshop will be glad to help.)

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands