KTM 390 DUKE 2017 Owner'S Manual Download Page 76

Page: 76 / 255

7 COMBINATION INSTRUMENT

7.17.13 ABS

F00811-01

Condition

• The motorcycle is stationary.

–

Press the

SET

button when the menu is closed.

–

Press the

DOWN

button until

Motorcycle

is marked. Press

the

SET

button to open the menu.

–

Press the

DOWN

button until

ABS

is marked. Press

the

SET

button to open the menu.

–

Activate the menu item using the

DOWN

button.

–

Press the

ABS

button to switch off

SET

or to select between

ABS modes.

Info

The ABS can only be reactivated by switching on the
ignition again.
When the

Road

ABS mode is enabled, ABS controls

both wheels.
When the

Sup Mot

ABS mode is enabled, ABS only con-

trols the front wheel. The rear wheel is not controlled by
ABS and may lock during braking maneuvers.

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands