KTM 390 DUKE 2017 Owner'S Manual Download Page 42

Page: 42 / 255

6 CONTROLS

6.8

Unlocking the steering

400731-01

–

Insert the key into the ignition/handlebar lock, press in, and
turn to the right. Remove the key.

You can now steer the bike again.

6.9

Opening the filler cap

Danger

Fire hazard

Fuel is highly flammable.

The fuel in the fuel tank expands when warm and can escape if overfilled.

–

Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.

–

Switch off the engine for refueling.

–

Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.

–

If any fuel is spilled, wipe it off immediately.

–

Observe the specifications for refueling.

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands