KTM 390 DUKE 2017 Owner'S Manual Download Page 97

Page: 97 / 255

9 RIDING INSTRUCTIONS

9.4

Shifting, riding

Warning

Danger of accidents

Abrupt load alterations can cause the vehicle to get out of control.

–

Avoid abrupt load alterations and sudden braking actions.

–

Adapt your speed to the road conditions.

Warning

Danger of accidents

If you change down at high engine speed, the rear wheel blocks and the engine

races.

–

Do not change into a low gear at high engine speed.

Warning

Danger of accidents

An incorrect ignition key position causes malfunctions.

–

Do not change the ignition key position while driving.

Warning

Danger of accidents

Adjustments to the vehicle distract attention from traffic activity.

–

Make all adjustments when the vehicle is at a standstill.

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands