KTM 390 DUKE 2017 Owner'S Manual Download Page 205

Page: 205 / 255

18 SERVICE WORK ON THE ENGINE

203

401955-12

–

Remove filler plug

and the O-ring from the clutch cover,

and fill up with engine oil.

Engine oil

1.7 l (1.8 qt.)

Engine oil
(SAE 15W/50)
(

p. 238)

–

Install and tighten the oil filler plug with O-ring.

Danger

Danger of poisoning

Exhaust gases are toxic and inhal-

ing them may result in unconsciousness and death.

–

Always make sure there is sufficient ventilation
when running the engine.

–

Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.

–

Start the engine and check that it is oil-tight.

Finishing work

–

Fit the front spoiler. (

p. 133)

–

Check the engine oil level. (

p. 199)

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands