KTM 390 DUKE 2017 Owner'S Manual Download Page 241

Page: 241 / 255

24 SUBSTANCES

239

Fork oil (SAE 5)

Standard/classification

–

SAE (

p. 242) (SAE 5)

Guideline

–

Use only oils that comply with the specified standards (see specifications on the container) and that possess
the corresponding properties.

Recommended supplier
Motorex

–

Racing Fork Oil

Super unleaded (ROZ 95/RON 95/PON 91)

Standard/classification

–

DIN EN 228 (ROZ 95/RON 95/PON 91)

Guideline

–

Only use unleaded super fuel that matches or is equivalent to the specified fuel grade.

–

Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use.

Info

not

use fuel containing methanol (e. g. M15, M85, M100) or more than 10 % ethanol (e. g. E15,

E25, E85, E100).

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands