KTM 390 DUKE 2017 Owner'S Manual Download Page 117

Page: 117 / 255

12 SERVICE WORK ON THE CHASSIS

115

12.1

Raising the motorcycle with the rear lifting gear

Note

Danger of damage

The parked vehicle can roll away or fall over.

–

Park the vehicle on a firm and level surface.

M00711-01

–

Mount the supports of the lifting gear.

–

Insert the adapter in the rear lifting gear.

Universal V adapter with bushings (61029955244)
Rear wheel work stand (69329955000)

–

Stand the motorcycle upright, align the lifting gear with the
swingarm and the adapters, and lift the motorcycle.

12.2

Removing the rear of the motorcycle from the lifting gear

Note

Danger of damage

The parked vehicle can roll away or fall over.

–

Park the vehicle on a firm and level surface.

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands