KTM 390 DUKE 2017 Owner'S Manual Download Page 48

Page: 48 / 255

6 CONTROLS

6.16

Foot brake lever

402177-10

Foot brake lever

is located in front of the right footrest.

The foot brake lever is used to activate the rear brake.

6.17

Side stand

402029-10

The side stand

is on the left side of the vehicle.

The side stand is used to park the motorcycle.

Info

The side stand must be folded up during motorcycle use.
Side stand is coupled with the safety start system; see the
riding instructions.

Possible states

• Side stand folded out

–

The vehicle can be leaned on the side

stand. The safety start system is active.

Summary of Contents for 390 DUKE 2017
































































































































































































































































Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands

KTM 390 DUKE 2017, Owner'S Manual

Search results

Summary of Contents for 390 DUKE 2017

Reviews:

Related manuals for 390 DUKE 2017

Brands by name

Popular brands