KTC KTC16B, Owner'S Manual, Page: 7 / 88

Owner’s Manual
9
Use only correct electrical devices:
3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool’s plug.
Do not modify
The plug provided. If it will not fit the outlet, have the proper outlet installed by a qualified electrician.
Keep tool dry, clean, and free from oil and grease
Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products,
or any solvents to clean tool.
Stay alert and exercise control
Watch what you are doing and use common sense. Do not operate tool when you are tired. Do not rush.
Do not use tool if switch does not turn it on and off
Have defective switches replaced by an authorized service center.
Do not operate a tool while under the influence of drugs, alcohol, or any medication
When servicing
Use only identical replacement parts. Use of any other parts may create a hazard or cause product
damage.
Use only recommended accessories
Listed in this manual or addendums. Use of accessories that are not listed may cause the risk of
personal injury. Instructions for safe use of accessories are included with the accessory.
Double check all setups
Make sure bit is tight and not making contact with tool or workpiece before connecting to power supply.
3. SPECIFIC SAFETY RULES
Keep bits clean and sharp
Sharp bits minimize stalling. Dirty and dull bits may cause misalignment of the material and possible
operator injury.
Keep hands away from work area
Keep hands away from the bit. Restrain any loose clothing, jewelry, long hair, etc, that may become
entangled in the bit.
Do not
Wear gloves, necktie, or loose clothing.
Always clamp workpiece and brace against column to prevent rotation
Never use your hand to hold the object while drilling.