KTC KTC16B, Owner'S Manual, Page: 36 / 88

38
Owner’s Manual
Tilting table
See Figure 22.
WARNING
To use the table in a bevel (tilted) position:
1. Loosen table bevel lock bolt.
2. Tilt table to desired angle by reading bevel scale. Retighten table bevel lock bolt.
To return table to original position:
1. Loosen table bevel lock bolt, tilt table back to 0° on bevel scale and retighten set screw, then tighten
table bevel lock bolt.
A - Bevel scale
B - Table bevel lock bolt
To reduce the risk of injury from spinning work or tool breakage, always clamp
workpiece and backup material securely to table before operating drill press with the
table tilted.