KTC KTC16B, Owner'S Manual, Page: 22 / 88

24
Owner’s Manual
Installing the table
See Figure 8.
1. Loosen table support lock and raise table support by turning table crank clockwise until support is
at a working height level. Tighten table support lock.
2. Remove protective covering from table and discard. Loosen table lock. Place table in table support
and tighten table lock (located under table) by hand.
Note
If table won’t fit into table support easily, pry open table support with a flat blade screwdriver.
Installing the head assembly
See Figure 9.
Note
This tool is heavy. To avoid back injury, keep your knees bent and lift with your legs, not your back, and
get help when needed.
A - Table
B - Table Support
C - Table Lock
D - Table Crank