KTC KTC16B, Owner'S Manual, Page: 10 / 88

12
Owner’s Manual
SYMBOL NAME
Safety Alert
Wet Conditions
Alert
Read The Owner’s
Manual
Eye Protection
V Volts
A Amperes
Hz Hertz
W
Watt
min Minutes
~
Alternating
Current
No Load Speed
.
../min Per Minute
5. ELECTRICAL
Extension cords
Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept
the tool's plug. When using a power tool at a considerable distance from the power source, use an
extension cord heavy enough to carry the current that the tool will draw. An undersized extension cord
will cause a drop in line voltage, resulting in a loss of power and causing the motor to overheat. Use
the chart provided below to determine the minimum wire size required in an extension cord. Only round
jacketed cords listed by Underwriter's Laboratories (UL) should be used.
Indicates a potential personal injury hazard.
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand owner’s
manual before using this product.
Always wear eye protection with side shields marked to comply with
ANSI Z87.1.
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
n
o
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute