KTC KTC16B, Owner'S Manual, Page: 14 / 88

16
Owner’s Manual
16
Base
Supports drill press. For additional stability, holes are provided in base to bolt drill press to floor.
Belt guard
Covers pulleys and belt during operation of drill press.
Belt tension handle
Turn handle counterclockwise to apply tension to belt, turn handle clockwise to release belt tension.
Refer to Assembly section "To Install the Idler Pulley" and "To Tension the Belts”.
Belt tension lock
Tightening handle locks motor bracket support to maintain correct belt distance and tension.
Bevel scale
Shows degree table is tilted for bevel operations. Scale is mounted on table support. It is to be used
for quick reference where accuracy is not critical.
Chuck
Holds drill bit or other recommended accessory to perform desired operations.
Collar
Holds the rack to the column. Rack remains movable in collar to permit table support movements.
Column support
Supports column, guides rack, and provides mounting holes for column to base.
Depth scale
Shows depth of hole being drilled in inches.
Depth scale lock
Locks the depth scale to selected depth.
Feed handle
For moving the chuck up or down. One or two of the handles may be removed if necessary whenever
the workpiece is of such unusual shape that it interferes with the handles.
Rack
Combines with gear mechanism to provide easy elevation of table by hand operated table crank.
A - Belt guard
B - Belt tension lock
C
- On / Off switch
D - Feed handle
E - Spring cap
F - Worklight
G - Table
H - Bevel scale
I
- Column
J - Table support lock
K - Belt tension handle
L - Head lock set screws
M - Column collar
N - Table crank
O
- Rack
P - Column support
Q - Base
R - Table bevel lock
S - Table lock
- Chuck
- Depth scale
- Worklight on/off
switch
- Depth scale lock