KTC KTC16B, Owner'S Manual, Page: 41 / 88

Owner’s Manual
43
Pulleys
See Figure 25.
Should you feel an unusually high level of vibration, pulleys may not be tightly secured on the motor
and/or spindle shafts. To make sure the pulleys are properly seated and tight, locate the set screw
on the motor pulley and the hex nut on the spindle pulley as shown in figure 25. Tighten the set screw
with a hex wrench and the hex nut with an adjustable wrench (turn hex nut counterclockwise to tighten).
A - Hex nut
B - Spindle pulley
C - Motor pulley