KTC KTC16B, Owner'S Manual, Page: 17 / 88

Owner’s Manual
19
WARNING
Tools needed
See Figure 3.
The following tools (not included or drawn to scale) are needed for ssembly:
A) Phillips Screwdriver
B) Flathead Screwdriver
C)
Combination Square
D) Adjustable Wrench
E) Framing Square
Loose parts list
See Figure 4.
The following items are included with the tool:
A) Head assembly 1 G) Flat washer 4 M) Hex key 1
B) Collar 1 H) Lock washer 4 N) Table 1
C)
Column 1
I)
Hex bolt 4
O)
Chuck 1
D)
Rack 1
J)
Table support 1
P)
Switch key 1
E) Column support 1 K) Table crank 1 Q) Vise 1
To reduce the risk of injury from unexpected drill press movement, bolt it to the floor.
Make sure and leave adequate room to fully open the belt guard. If the workpiece is too
large to easily support with one hand, provide an auxiliary support.