- 10 -
6.0 Operation.
6.1 Main Screen.
Shows the actually wanted data
during operation.
STEP 1
OXY: 10%
* The actual output step
TEMP: 70°C PRG 1
* Oxygen content in fluegas
* Boiler forward temperature
* Used programme
6.2 Changing the settings.
In this section, we describe the various parameters that may be changed, as well as their influence..
In connection with the operation of the plant control, the following commands are used.
* Press ”MENU” for 3-5sec, in order to be admitted into the menu.
* Use the keys ”
▼
” and ”
▲
”
to scroll to the parameter you wish to change.
* When the parameter you wish to change is shown in the top line, press ”MENU” and the value of the
parameter in question is shown.
* Change the setting with the ”
▼
” and ”
▲
”
keys.
* After the change has been made, press the ”MENU” key and the new choice has been saved.
* Press ”
▼
” to proceed to the next parameter you wish to change – or press the ”START-UP” and the
“MENU” keys at the same time to finish.
6.3 Languages.
As standard, the software includes texts in 5 different languages.
DANISH DK
Press ”MENU”
DANISH DK
WOODPELLETS PRG 1
ADJUST
Select the preferred language with the ”
▼
” and ”
▲
”
keys, you may choose between DK/S/F/D/EN
(Danish/Swedish/French/German/English).
After the language selection enter the ”MENU” key, and your choice has been saved.
Press ”
▼
” to proceed to the next parameter you wish to change – or press the ”START-UP” and the
“MENU” keys at the same time to finish.
6.4 Fuel type.
The control is provided with 3 programmes which are separately adjustable for each fuel type. Once the
adjustment has been made, it is only necessary to switch the programme No. when changing fuel type.
WOODPELLETS PRG 1
Press ”MENU
” WOODPELLETS PRG 1
BOILER TEMP
ADJUST
