KSB GIW MDX, Installation & Operating Manual

Page: 6 / 53

MDX [en-US]
6
2 Safety
These operating instructions contain fundamental information that must be complied with during installation, operation and
maintenance. Therefore this operating manual must be read and understood both by the installing personnel and the responsible
trained personnel / operators prior to installation and commissioning, and it must always be kept close to the operating location
of the machine / unit for easy access.
Not only must the general safety instructions given in this chapter of "Safety" be complied with, but also the safety instructions
outlined under specific headings.
2.1 Safety Markings
Definition of safety symbols/markings
Symbol Description
DANGER
DANGER
This signal word indicates a high-risk hazard which, if not avoided, will result in death or
serious injury.
WARNING
WARNING
This signal word indicates a medium-risk hazard which, if not avoided, could result in death
or serious injury.
CAUTION
CAUTION
This signal word indicates a hazard which, if not avoided, could result in damage to the
machine and its functions.
Explosion protection
This symbol identifies information about avoiding explosions in potentially explosive
atmospheres in accordance with EC Directive 94/9/EC (ATEX).
General hazard
In conjunction with one of the signal words this symbol indicates a hazard which will or could
result in death or serious injury.
Electrical hazard
In conjunction with one of the signal words this symbol indicates a hazard involving electrical
voltage and identifies information about protection against electrical voltage.
Machine damage
In conjunction with the signal word CAUTION this symbol indicates a hazard for the machine
and its functions.
Instructions attached directly to the machine, such as:

Arrow indicating the direction of rotation

Marking for fluid connections must always be complied with and be kept in legible condition at all times.
2.2 Personnel Qualification and Training
All personnel involved in the operation, maintenance, inspection and installation of the machine must be fully qualified to carry
out the work involved.
Personnel responsibilities, competence and supervision must be clearly defined by the operator. If the personnel in question are
not already in possession of the requisite know-how, appropriate training and instruction must be provided. If required, the
operator may commission the manufacturer / supplier to provide such training. In addition, the operator is responsible for
ensuring that the contents of the operating instructions are fully understood by the responsible personnel.