Amaprop
R
20
Please note!
A bulge needs to form here! Please refer to sec-
tion 3.1!
It is imperative to observe the embedment depth (thread--free
section on the anchor bolt) and the manufacturer’s application
instructions!
Concrete quality at least C20/25 to DIN 1045 or equivalent
standard/Min. thickness of concrete 160 mm.
Allow the composite anchor bolts to cure, mount the braces and
tighten the bolts. Composite anchor bolt M16: Tighten to a
torque of
60
Nm; secure with Loctite and lock nuts!
Guide rail
Holding bracket
Install the retaining brackets with chemical anchor bolts M16;
tightening torque: 60 Nm. Secure fasteners with Loctite and
lock nuts! The retaining brackets must be at right angles to the
guide rail. Tighten the bolts.
Tightening torques: M16x160: 150 Nm.
Do not forget to fit the lock nuts!
Summary of Contents for Amaprop 1200
Page 38: ...AmapropR...
Page 39: ...AmapropR...
