Krone Comprima F 125, Original Operating Manual

Page: 108 / 234

KRONE ISOBUS-Terminal CCI 100
VI - 32
6.10.1 Menu 4-2 „Manual sensor test“
CC000226
4-2
CC000227
Fig.31
In the manual sensor test, the sensors that are installed on the machine are checked for errors. In
addition, the sensors can be correctly adjusted in the manual sensor test. There is no guarantee the
machine is working correctly until after the sensors have been adjusted.
Caution!
The P.T.O. shaft must not be turning during the sensor test.
Displaying the menu
Main menu 4 "Service" is called.
• You can select menu 4-2 by pressing the function key or . The symbol is shown in
reverse colours.
• Press the rotary potentiometer
• Press function key
Selecting the sensor
• Select the sensor by pressing the function key or
The selected sensor is displayed inversely and is tested.
Setting values:
The minimum and maximum setting values with the sensor alive (metal in front of the sensor) are
shown in the upper part of the bar display. The current setting value (actual value) is displayed under
the bar display.
The distance from the sensor to the metal must be adjusted so that in the alive state the bar is in the
upper mark. Next check whether the bar is in non-alive state in the lower marked area.