Korg wavestate native User Manual Download Page 21

Page: 21 / 91

Overview page

1: Performance Select

6: Mod Knob

Mode

2: Wave Sequence Select 3: Master Lane Progress Bar

5: Mod

Inspector

4: Program Effects

8: Program

Parameters

7: Wave

Sequence

Overview

9: Program

Select

1: Performance Select

This shows the currently selected Performance. Use the < and > arrows to step through Performances one by one,

or click on the name to bring up a browser window. Right-click/control-click (macOS) on the name to bring up a

contextual menu for saving and renaming. For more information, see “1: Performance Select” on page 3, and

“Structure” on page 2.

2: Wave Sequence Select

This is the Program’s Wave Sequence. (If the Wave Sequence page Mode parameter is set to

Single Multisample

, the

Multisample is shown here instead.) Use the < and > arrows to step through Wave Sequences one by one, or click on the

name to bring up a browser window. Right-click/control-click (macOS) on the name to bring up a contextual menu for

saving and renaming.

3. Master Lane Progress Bar

When enabled, the Master Lane restarts all of the other Lanes after either a specified number of beats or elapsed time;

see “Master Lane” on page 31. This progress bar shows its current state.

4: Program Effects

This section shows an overview of the Program’s three effects. For detailed editing, see “Effects page” on page 72.

5: Mod Inspector

You can modulate parameters such as Filter Cutoff or effects Wet/Dry directly from the Overview page, without diving

into detailed editing. This shows the modulation routings for the selected parameter. You can add or delete routings

from the list, adjust modulation intensity, and change the selected Mod Sources (including adding a second Mod

Source for routings created by drag-and-drop).

Summary of Contents for wavestate native




























































































Search results

Summary of Contents for wavestate native

Reviews:

Related manuals for wavestate native

Brands by name

Popular brands

Korg wavestate native, User Manual

Search results

Summary of Contents for wavestate native

Reviews:

Related manuals for wavestate native

Brands by name

Popular brands