Korg wavestate native User Manual Download Page 25

Page: 25 / 91

Synthesis page

Low Resonance

High Resonance

Trim

[0…100]

This adjusts the volume level at the input to the filter. If you notice that the sound is distorting, especially with high

Resonance settings, you can turn the level down here.

Out (Output Level)

[0…100]

This controls the output level of the filter.

2-Pole LP/HP/BP/BR

(Resonance) Bass

[Full, Tight]

This is available only when Type is one of the

2-pole Resonant

4-pole Resonant

settings, or

Multi Filter

. Resonance

Bass controls the character of the filter resonance at low cutoff frequencies. Its effect is most noticeable with high

Resonance settings.

Tight

produces a more restrained resonance, similar to a classic, American, wood-paneled monophonic synthesizer.

Full

produces a wide, boomy resonance, reminiscent of a famous five-voice American synthesizer.

4-Pole LP/HP/BP/BR

Resonance Type

[Standard, High]

This is available only when the Type is set to one of the

4-pole

settings.

Standard

provides the resonance character of a typical analog 4-pole filter.

High

creates a more pronounced resonance.

Summary of Contents for wavestate native




























































































Search results

Summary of Contents for wavestate native

Reviews:

Related manuals for wavestate native

Brands by name

Popular brands

Korg wavestate native, User Manual

Search results

Summary of Contents for wavestate native

Reviews:

Related manuals for wavestate native

Brands by name

Popular brands