Wave Sequencing 2.0
34
Xfade
[Time: 0.0000…10.0000 seconds]
[Tempo: List of rhythmic values]
If Timing Lane Xfade is set to
Time
, you can set the length of the crossfade in seconds.
If Timing Lane Xfade is set to
Tempo
, you can set the basic length of the crossfade as a rhythmic value, relative to the
system tempo. The values range from a 32nd note to a double breve (four whole notes), including dotted notes and
triplets.
x (Multiply Base Note by…)
[1…32]
This appears if Timing Lane Xfade is set to
Tempo
. It multiplies the length of the Xfade Base Note.
Fade-In (Fade-In Shape)
[Log, -99…-1, Linear, +1…+99, Exp]
This sets the shape for the next step’s fade-in within the crossfade.
Log
: the step will fade in quickly at first, and then move more slowly as it nears the end of the crossfade. To create an
equal-power crossfade, use
Log
for both Fade-In and Out.
Linear
: the step will fade in steadily over the duration of the crossfade.
Exp
: the step will fade in slowly at first, and then move more rapidly as it nears end of the crossfade.
Fade-Out (Fade-Out Shape)
[Log, -99…-1, Linear, +1…+99, Exp]
This sets the shape for the current step’s fade-out within the crossfade.
Log
: the step will fade out slowly at first, and then move more rapidly as it approaches the end of the crossfade.
Linear
: the step will fade out steadily over the duration of the crossfade.
Exp
: the step will fade out quickly at first, and then move more slowly as it nears the end of the crossfade.
Sample
This Lane sets the sample played by each Step.
Sample Lane
Preset, Start, End, Loop Start, Loop End, Repeats
See “Standard Lane Controls” on page 30.
Pitch Lane
[Only Affects Pitch, Affects Sample Map]
Multisamples typically include many different samples, mapped across the keyboard. When you transpose the
keyboard, for instance, it’s not just the pitch that changes; different samples will be selected as well. Sometimes, you may
want the Pitch Lane to affect sample choice, as if you were transposing the keyboard; other times, you may want it to
only change the pitch, without affecting the sample choice. This parameter lets you choose between the two options.
Only Affects Pitch:
The Pitch Lane only affects the played pitch; it will not change the sample chosen by a given key.
Affects Sample Map:
The Pitch Lane will act similar to transposing the keyboard, and may select different samples
according to the selected Multisample.
Sample Lane Step
Channel
[Stereo, Left, Right, n/a]
This applies to stereo Multisamples only; for mono Multisamples, “n/a” is shown. You can choose whether to use the
original
Stereo
signal, or only the
Left
or
Right
channels (in mono).
