Korg wavestate native User Manual Download Page 76

Page: 76 / 91

Effects page

1: Mini Editor

2: Effect Type

3: Effect Preset

5: Detailed

Editor

4: Effect On/Off

Overview

Each Program has its own Pre FX, Mod FX, and Delay.

1. Mini Editor

The three effects have “mini editors” with the most important parameters, providing a quick overview of all of the

Program’s effects.
Click anywhere on one of the three mini-editors to show the detailed editor below.

2. Effect Type

For each effect, you can select a Type (aka algorithm) and a Preset within that Type. For full lists of Effect Types, see

“Pre FX” on page 73, “Mod FX” on page 74 , “Delay” on page 75, and “Master Reverb” on page 76.
Types ending in “all,” such as

Delay All

Chorus All

, etc., let you select Presets from all related Types.

3. Effect Preset

These are the presets available for the selected Type.

4. Effect On/Off

Click on the power button to the left of the effect type name (Pre FX, Mod FX etc.) to turn effects on and off.

5. Detailed Editor

This shows all of the detailed parameters for the effect selected by clicking on one of the three mini-editors, above.

Summary of Contents for wavestate native




























































































Search results

Summary of Contents for wavestate native

Reviews:

Related manuals for wavestate native

Brands by name

Popular brands

Korg wavestate native, User Manual

Search results

Summary of Contents for wavestate native

Reviews:

Related manuals for wavestate native

Brands by name

Popular brands