Korg wavestate native User Manual Download Page 34

Page: 34 / 91

Wave Sequencing 2.0

Sync Notes

A10 A11 A12

Timing Lane

Sample Lane

…

Step Seq Lane

A10 A11 A12

Timing Lane

Sample Lane

…

Step Seq Lane

Sounding Note

New Note

Mode = Single Multisample

(Multisample)

[List of Multisamples]

This selects the Multisample for the Step. Use the < and > arrows to step through Multisamples one by one, or click on

the name to bring up a browser window.

Start Offset

[Off, 1st…8th]

In addition to simply starting playback from the beginning, Multisamples may have up to 8 different pre-programmed

alternate starting points, or “Start Offsets.” These skip part of the beginning of the samples, either to make them more

gentle (for percussive sounds) or to make them start more quickly (for sounds with slow attacks). The number of

available offsets will vary depending on the specific Multisample.
If no alternate start points are available, this will show

n/a

Channel

[Stereo, Left, Right, n/a]

This applies to stereo Multisamples only; for mono Multisamples, “n/a” is shown. You can choose whether to use the

original

Stereo

signal, or only the

Left

Right

channels (in mono).

Standard Lane Controls

These controls apply to all lanes except Master. (Master still has Presets, however.) Some Lanes have special parameters

in addition to the standard controls, as described in the following sections.

Lane Preset

Lane Presets store all of the parameters for the Lane and its Steps. Explore the system by mixing and matching presets

for different Lanes.

Summary of Contents for wavestate native




























































































Search results

Summary of Contents for wavestate native

Reviews:

Related manuals for wavestate native

Brands by name

Popular brands

Korg wavestate native, User Manual

Search results

Summary of Contents for wavestate native

Reviews:

Related manuals for wavestate native

Brands by name

Popular brands