QSEVEN-Q7AL - Rev.1.0
www.kontron.com
// 67
4.
On the next start, boot into shell.
5.
Change to the drive representing the USB stick.
fsx: (x = 0,1,2,etc. represents the USB stick)
Change to the directory where you copied the flash tool.
cd <your_directory>
6.
Start flash.nsh (if available) OR enter
fpt –F Q7ALi<xxx>.bin
7.
Wait until flashing is successful and then power cycle the board.
Do not switch off the power during the flash process!
Doing so leaves your module unrecoverable.
Changes made in step 3 above are only effective during the first boot after applying the
changes. If you fail to flash during the next boot, then you might have to repeat steps 3.
