QSEVEN-Q7AL - Rev.1.0
www.kontron.com
// 45
Sub-Screen
Function
Second level Sub-Screen / Description
Thermal>
(continued)
Passive TC2
Value>
Sets TC2 value for the ACPI Passive Cooling Formula.(Range: 1 – 16)
Passive TSP
Value>
Sets TSP value for the ACPI Passive Cooling Formula.(Range: 2 – 32)
System
Component>
OS Reset Selet>
Select the reset type in FACP table
[Warm Reset, Cold Reset]
Spread Spectrum Clocking Configuration (SSC)
DDR SSC>
Enable DDR SSC
[Enable, Disable]
DDR SSC
Selection Table>
Select the item in SSC selection table for DDR spread spectrum
[0% (No SSC), -0.1%, -0.2%, -0.3%, -0.4%, -0.5%,]
DDR Clock
Bending
Selection Table>
Select Clock Bending
[1.3%, 0.6%, 0% (No Clock Bending), -0.9%]
HighSpeed
SerialIO SSC>
Enable HighSpeed SerialIO SSC configuration
[Enable, Disable]
HighSpeed
SerialIO SSC
Selection T>
Select the item in SSC selection table for HighSpeed SerialIO spread
spectrum
[0% (No SSC), -0.1%, -0.2%, -0.3%, -0.4%, -0.5%,]
Debug
Configuration>
Kernel Debugger
Enable>
Enable or disable support for a kernel debugger
[Enable, Disable]
APEI BERT>
Enable or disable APEI BERT
[Enable, Disable]
ACPI Memory
Debug>
Enable or disable ACPI Memory Debug
[Enable, Disable]
End Of Post (TXE
Debug)>
Disable to stop BIOS from sending End of Post Message
[Enabled, Disabled]
Lock Directory
(TXE Debug)>
Enable BIOS to lock SETUP variable after end of post
[Enabled, Disabled]
Suppress PTT
Commands>
Bypass TPM2 commands submitting to PTT FW
[Enabled, Disabled]
TDO GPIO Pin>
If select Auto, TDO will be disabled for A0 silicon only. For other
steppings, TDO will be enabled. [Enable, Disable, Auto]
Max Memory 2G>
Set Maximum Memory Size to 2 GB
[Enable, Disable]
Persistent RAM
size>
Specify the amount of main memory to be reserved for Pram.
[4MB, 16MB, 64MB, Disable]
OS DnX focus
entry>
Enable OS Dnx
[Enable, Disable]
Processor Trace
Memory
Allocation>
Disable or Select Processor trace memory region size : from 4 KB to
128 MB
[Disabled, 4KB, 8KB, 16KB, 32KB, 64KB, 128KB, 256KB, 512KB, 1MB,
2MB, 4MB, 8MB, 16MB, 32MB, 64MB, 128MB]
CSE Data Clear>
Data Clear is for reset/clearing of the CSE data region
RC ACPI Setting>
Native PCIE
Enable>
Enable or disable PCI Express Native Control in Windows
[Enable, Disable]
