Kontron QSEVEN-Q7AL, User Manual

Page: 50 / 69

QSEVEN-Q7AL - Rev.1.0
www.kontron.com // 50
Function Second level Sub-Screen / Description
Intel Graphics Pei
Display Peim> Enable or disable Pei (Early) Display
[Enabled, Disabled]
GOP Brightness
Level> Set GOP Brightness Level; (Range: 0 – 255)
[20, 40, 60, 80, 100, 120, 140, 160, 180, 200, 220, 240, 255]
VBT Select> Select VBT for GOP Driver
[DDI1=DP++/HDMI, DDI1=HDMI]
Integrated
Graphics Device
(IGD)> Enable: Enable IGD when selected as the Primary Video Adaptor; Disable: Always disable
IGD
[Enabled, Disabled]
Primary Display> Select which of IGD/PCI Graphics device should be Primary Display
[IGD, PCIe, HG]
RC6 (render
Standby)> Check to enable render standby support. IF SOix is enabled, RC6 should be enabled.
This function is read only if SOix is enabled.
[Enabled, Disabled]
GTT Size> Selects the GTT size
[2 MB, 4 MB, 8 MB]
Aperature Size> Selects the aperture size
[128 MB, 256 MB, 512 MB]
DVMT Pre-
Allocated> Selects DVMT 5.0 pre-allocated (fixed) graphics memory size used by Internal graphics
[64 M, 96 M, 128 M, 160 M, 192 M, 224 M, 256 M, 288 M, 320 M, 352 M 384 M, 416 M, 448
M, 480M, 512 M]
DVMT Total Gfx
Mem> Selects DVMT 5.0 total graphics memory size used by internal graphics device
[128 M, 256 M, MAX]
Cd Clock
Frequency> Selects the highest Cd clock frequency supported by the platform
[144 MHz, 288 MHz, 384 MHz, 576 MHz, 624 MHz]
GT PM Support> GT PM Support
[Enabled, Disabled]
PAVP Enable> PAVP
[Enabled, Disabled]
BIA> Auto: GMCH uses VBIOS default
Level n: is enabled with selected aggressiveness level
[Auto, Disabled, Level 1, Level 2, Level 3, Level 4, Level5]
ALS Support> Valid only for ACPI
[Enable, Disable]
IGD Flat Panel> [Auto, 640x480, 800x600, 1024x768, 1280x1024, 1366x768, 1680x1050, 1920x1200,
1280x800]
IGD Boot Type> Select preference for IGD display interface used when system boots.
[Auto, VGA port, HDMI, DP Port B, Dp Port C, eDP, DSI Prt A, DSI Port C]
Panel Scaling> Sets Panel scaling
[Auto, Centering, Stretching]
GMCH BLC
Control> Backlight control settings
[PWM-Inverted, GMBus-Inverted, PWM-Normal, GMBus-Normal]